Warning/Indicator Lights and Warning Sounds

Depress Brake Pedal. Brake Hold Disabled

This message is indicated when there is a problem with the brake related system while the vehicle is being held in a stop position by the AUTOHOLD function.

Depress the brake pedal. Cancel the AUTOHOLD function and have your vehicle inspected at an Authorized Mazda Dealer.

Steep Slope. Continue Pressing Brake Pedal to Hold Stopped Position

This message indicates the possibility of the vehicle not being held in the stopped position by the AUTOHOLD function, such as on steep slopes.

Depress and hold your foot on the brake pedal.

Depress Brake Pedal and Operate Switch to Release Elec. Parking Brake

This message is indicated when the Electric Parking Brake (EPB) switch is operated without depressing the brake pedal.

Operate the Electric Parking Brake (EPB) switch while depressing the brake pedal.

Depress Brake Pedal and Operate Switch to Release

This message is indicated when the cancel operation is done without depressing the brake pedal while the vehicle is being held in the stopped position by the AUTOHOLD function.

Cancel the AUTOHOLD function stop hold control while depressing the brake pedal.

Mazda Radar Cruise Control Canceled. Drive Safely

This message is indicated when the Mazda Radar Cruise Control (MRCC), Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function), and the Traffic Jam Assist (TJA) have been canceled other than by the driver.

Have your vehicle inspected by an Authorized Mazda Dealer.

Distance & Speed Alert Operation Canceled Drive Safely

This message is indicated when the Distance & Speed Alert (DSA) have been canceled other than by the driver.

Have your vehicle inspected by an Authorized Mazda Dealer.

Cruise Control Operation Canceled. Drive Safely

This message is indicated when the Cruise Control have been canceled other than by the driver.

Have your vehicle inspected by an Authorized Mazda Dealer.

Emergency Braking Activated. Depress Brake Pedal to Hold Stop

This message is indicated after the Smart Brake Support (SBS) brakes operate and when the Smart Brake Support (SBS) is canceled.

Depress the brake pedal.

Touch Key Fob to Push Button Start Switch

This message is indicated when the key battery is weak (battery dead or damaged key).

Touch the key against push button start to start the engine.

Refer to Engine Start Function When Key Battery is Dead (Search).

Depress Brake Pedal to Start Vehicle

This message is indicated when the push button start is pressed without depressing the brake pedal.

When starting the engine, press the push button start with the brake pedal depressed.

Depress Clutch Pedal to Start Vehicle

This message is indicated when the push button start is pressed without depressing the clutch pedal.

When starting the engine, press the push button start with the clutch pedal depressed.

Check Gear Selector Lever Position

This message is indicated when the selector lever is shifted to the P or R position while driving.

Check the selector lever position.

Close Door and Fasten Seat Belt

This message is indicated when AUTOHOLD is about to operate and a door is opened or a seat belt is unfastened.

When the AUTOHOLD is turned on, close the doors and fasten seat belts.

Wiper Blades Must Be on Windshield Before Operating

This message is indicated when the ignition is switched ON with the wiper arms at the service positions.

Return the wiper arms to the initial positions.

Windshield Wiper Range of Motion Reduced. Remove Obstruction(s)

This message is indicated when there is snow or dirt accumulation on the windshield and the wiper operation range is narrowed.

Remove foreign matter from the windshield.

Vehicle Not Switched Off

This message is indicated when the driver’s door is opened without switching the ignition OFF.

Switch the ignition OFF before leaving the vehicle.

Gear Selector Lever Not in Park

Displays when the push button start is pressed while the selector lever is in a position other than P, and the ignition is switched to ACC.

Shift the selector lever to the P position and then switch the ignition OFF.

Excessive Transmission Temperature. Drive Slowly

This message is indicated when the internal temperature of the automatic transmission is high.

Drive slowly to reduce load on the automatic transmission.

Excessive Transmission Temp. Stop Vehicle in a Safe Location

This message is indicated when the automatic transmission fluid temperature is abnormally high.

Park the vehicle in a safe place immediately and contact an Authorized Mazda Dealer.