How to Use the System

Top view/Front view, Top view/Front wide view, Side view

Indication

Images are displayed on the screen when the 360°View Monitor switch is pressed with all of the following conditions met.

  • The ignition is switched ON.

  • The shift lever/selector lever is in a position other than R.

 

Display switching

The displayed screen can be changed each time the 360°view monitor switch is pressed.

  1. Top view/Front view

  2. Top view/Front wide view

  3. Side view

  4. Home screen

 

  • When the shift lever/selector lever is in R position, the displayed screen does not switch to the top view/front view, top view/front wide view, or the side view.

  • Display of the top view/front view, top view/front wide view, or the side view stops even with the display conditions met if any of the following conditions occurs.

    • When a switch around the commander knob is pressed.

    • (Manual transmission)

      The parking brake is applied.

    • (Automatic transmission)

      The selector lever is shifted to P position (displayed when the selector lever is in a position other than P).

    • (Displayed when vehicle speed is less than 15 km/h (9.3 mph))

      • 4 minutes and 30 seconds have passed.

      • The vehicle speed is about 15 km/h (9.3 mph) or faster.

    • (Displayed when the vehicle speed is about 15 km/h (9.3 mph) or faster)

      • The vehicle speed is about 15 km/h (9.3 mph) or faster after 8 seconds have passed since pressing the 360°View Monitor switch.

      • 4 minutes and 22 seconds have passed from the point when the vehicle speed was less than 15 km/h (9.3 mph) after 8 seconds have passed since pressing the 360°View Monitor switch.

  • The 360°View Monitor settings can be changed as follows.

    Refer to the Settings section in the Mazda Connect Owner's Manual.

    • Automatic display of the 360°View Monitor when the ultrasonic sensor detects an obstruction.

    • Automatic display of the 360°View Monitor when the ignition is switched ON.

    • Screen priority level when the system launches.

Close Note
View Note

Top view/Rear view, Top view/Rear wide view

The top view/rear view, top view/rear wide view displays when all of the following conditions are met.

  • The ignition is switched ON.

  • Shift lever/selector lever is in R position.

Display switching

The displayed screen can be changed each time the 360°view monitor switch is pressed.

  1. Top view/Rear view

  2. Top view/Rear wide view

 

  • The top view/rear view and top view/rear wide view automatically display whether or not the 360°View Monitor switch is turned on or off when shifting the shift lever/selector lever to R position.

  • The top view/rear view and top view/rear wide view displays the previously displayed screen.

  • The setting can be changed to display the top view/front view when shifting from reverse to a forward gear without operating the 360°View Monitor switch to check the front of the vehicle while parallel parking.

    Refer to the Settings section in the Mazda Connect Owner's Manual.

Close Note
View Note

Screen operation/icon

 

Always stop the vehicle when adjusting the 360°View Monitor image quality.

Do not adjust the 360°View Monitor image quality while driving. If you adjust the 360°View Monitor image quality (such as brightness, contrast, tone, and color density) while driving, it could lead to an unexpected accident.

Close Warning
View Warning

Display/Icon

Content

(1)

View status icon

Indicates which image is displayed among the front view/front wide view/side view/rear view/rear wide view.

(2)

Parking sensor status icon

Indicates that the parking sensor has a problem or it is switched off.

Page top