Message Indicated on Multi-information Display (Some Models)
If there is a notification from the vehicle, a message is displayed in the multi-information display. Check the information and take the necessary action.
If the warning light turns on/flashes simultaneously or a symbol is indicated in the display, check the information regarding the warning light or symbol.
Refer to If a Warning Light Turns On or Flashes (Search).
|
Display |
Content |
Action to be taken |
|---|---|---|
 |
Indicated when the push button start is pressed while the selector lever is not in the P position. |
Shift the selector lever to the P position. |
 |
Indicated when the push button start is pressed without depressing the brake pedal. |
Depress the brake pedal and press the push button start. |
 |
Indicated when the push button start is pressed without depressing the clutch pedal. |
Depress the clutch pedal and press the push button start. |
 |
Indicates when the Electric Parking Brake (EPB) switch is operated without depressing the brake pedal. |
Operate the Electric Parking Brake (EPB) switch while depressing the brake pedal. |
 |
Indicates when there is a problem with the brake related system while the vehicle is being held in a stop position by the AUTOHOLD function or during the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) stop hold control. |
Depress the brake pedal. Cancel the AUTOHOLD function or the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function), and have your vehicle inspected at an Authorized Mazda Dealer. |
 |
Indicates the possibility of the vehicle not being held in the stopped position by the AUTOHOLD function or the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) stop hold control, such as on steep slopes. |
Depress and hold your foot on the brake pedal. |
 |
Indicates when the cancel operation is done without depressing the brake pedal while the vehicle is being held in the stopped position by the AUTOHOLD function. |
Cancel the AUTOHOLD function stop hold control while depressing the brake pedal. |
 |
Indicated when the engine coolant temperature is high or the engine is hot, and the engine output is limited. |
Drive slowly and make sure that the indication turns off. If the indication does not turn off, consult an Authorized Mazda Dealer. |
 |
Indicated when the engine speed increases because the engine is being cleaned internally. |
The engine speed will increase while the engine is running an internal cleaning cycle with the selector lever in the P or N position. Do not stop the engine while the engine speed is high. When the cleaning cycle is completed, the engine speed will return to normal. |
